Category
- Products
-
- Wiki
- Contact us
Inverter manufacturers
sales@inverters.cn
Tag:
Single phase inverter normally is used in 200V AC to 240V AC in low
power applications, like small pumps. The AC motor's input need to be
three phase as all of the inverters are three phase output. In our
factory, the 1 phase inverters power is from 0.5HP to 3HP.
This single phase inverter is the updated generation driver. Due to the new technology being used in the inverters, this single phase inverter is in high performance & more stable against the old one. Also, the updated 1 phase inverter which is manufacturing by Gozuk in China, has inherit the advantage features, like vector control, RS 485 communication, powerful overload ability and much more.
Single phase inverter features
This single phase inverter is the updated generation driver. Due to the new technology being used in the inverters, this single phase inverter is in high performance & more stable against the old one. Also, the updated 1 phase inverter which is manufacturing by Gozuk in China, has inherit the advantage features, like vector control, RS 485 communication, powerful overload ability and much more.
Single phase inverter features
- Input voltage: 1 phase 220V, 230V, 240V
- Output voltage: 3 phase rated input voltage
- Power range: 0.4kW to 2.2kW
- Vector control single phase inverter
- Multiple programmable multi-function input/output terminals
- Special speed tracking function without impact
- Rich fault protection and operation monitoring function
- 32 bit high speed CPU special for AC motor control
- Low frequency with high start torque: 0.5Hz/150%
- Simple PLC with multi-step control function
- Built-in brake unit
- Offer RS485, support MODBUS-RTU communication protocol
- Close-loop control with built-in PID
- Dynamic torque current control, rapid response to load's change
- Load distribution control function
- Online modify and check parameters of the inverters
- Wobble frequency control special for spinning
- Simple servo fixed-length control function
Tags: inverter, Single phase inverter
1 phase inverter normally is for small power electric AC motor speed control applications, with single phase 220V to 240V input and output 3 phase voltage (lower than input voltage), due to the compact design, this type inverter can be installed in a small space easily.
Single phase inverter specification:
Single phase inverter specification:
- Power range: 0.4kW to 2.2kW
- Input voltage: 220V, 230V, 240V fluctuate rate 15% plus-minus
-
Output voltage: 0 to rated input voltage, three phase
- Sensorless vector control inverter
- Output high torque under very low frequency
- Rich fault protection function to monitor operation record
- Dynamic torque control, rapid response according to load's change
- Built-in braking unit to allow accurate control
- Provide RS-485, Modbus-RTU to communicate with PLC
- Simple PLC control with multi-step program terminals function
- Check & modify inverters parameter online
- Built-in PID for close loop control mode
- 32 bit high speed CPU in fast calculation